Resource Library

Go Back

Stand Alone Treatment

This service is designed to be performed at the shampoo bowl

  1. Mix 1/2oz (15ml) No.1 with 3oz (90ml) of water in a non-spraying applicator bottle. Take client to shampoo bowl and saturate thoroughly. Process for 5 minutes.
  2. Without rinsing, apply a generous amount of No.2 from roots to ends and comb through thoroughly.
  3. Process for a minimum of 10-20 minutes.
  4. Rinse, shampoo and condition. Follow with moisture and protein where applicable.

*We recommend applying to dry hair to see saturation. If client has product buildup such as oils or silicones, shampoo first and then apply to damp, towel dried hair. If client has mineral buildup, a hard water treatment is recommended first to remove this as it will act as a barrier.

*Please note, if client requires more or less product in regards to first step, measurements may be changed. For short hair, mix 1/4oz (7.5ml) No.1 with 1.5oz (45ml) water. For long hair, mix 1oz (30ml) No.1 with 6oz (180ml) water.